Kenmore 1700 Use and Care Guide - Page 6

Step 3. Water Fill WARNING: To reduce the risk of fire or shock hazard, do not pour or spill water into control or motor area. If controls get wet, let them dry completely and have unit checked by qualified service personnel before plugging in After the humidifier is positioned where it will be operating, you are ready to fill the humidifier. The bottle tilts out and away from the base. Take care not to bump or damage fill valve assembly on the bottom of the bottle. Invert the bottle, Press the valve stem button into the bottle and turn clockwise to lock in open position° Place bottle under the faucet Fill the bottle, being careful not to allow any debris to get in the valve seating. Once the bottle is full, press the valve stem button and turn counter clockwise to release and close_ CAUTION: Use only 32-14900 EPA Registered Bactedostat from Sears. Under no circumstances should you use water treatment products designed for Rotobelt or Ultrasonic humidifiers. Place the water bottle back into the humidifier base° When positioned properly, the plunger will open and the water will flow into the base. The base will hold the entire contents of the water bottle. Once the bottle is empty, remove it and repeat the filling process° The humidifier is now filled to capacity. For less frequent filling let the humidifier exhaust both the water from the bottle and the base before filling. ___i _i i i PUSHIN TURN CLOCKWISE Press vak,e stem and turn ckx:kwise to _ock in open positbn - Counterclockwise to release and close Assembly \. \