Kenmore 19233 Owners Manual - Page 124
OFYOUR, MACHINE, Clean the hook race - computer sewing machine
UPC - 852129000511
View all Kenmore 19233 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
SECTION V. CARE OFYOUR MACHINE Clean the hook race and feed dog Screw driver Set screw (_) Needle plate Lint brush (_ Hook race Bobbin holder (_ Feed dog (_ Soft, dry cloth f % Press the up/down needle position button to raise the needle, then unplug the sewing machine. Do not dismantle the machine other than explained on this page. Remove the cover plate by sliding the cover plate release button to the right. Take out the bobbin. Brush out dust and lint. (You may also use a vacuum cleaner.) Remove the set screw _ on the left hand side of the needle plate _ with the screwdriver (_0supplied with the machine. Remove the needle plate (_). Take out the bobbin. Lift up the bobbin holder _ and remove it. Clean the hook with a lint brush. % Clean the feed dog and hook race with the lint brush. Clean the center of the hook race with a dry cloth. *You may also use a vacuum cleaner. * The machine does not require oiling. Assemble the hook race Bobbin holder Stopper (_) Knob (_) Needle plate guide pins Screwdriver Guide holes Insert the bobbin holder so that the knob fits next to the % stopper in the hook race. Insert the bobbin. Attach the needle plate with screw. After cleaning the machine, make sure the needle and presser foot are attached. 106 J %