Kenmore 27515 Owners Manual - Page 17
Important, Assembly
![]() |
UPC - 020275150002
View all Kenmore 27515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
POWERMATE CARE Always follow all safety precautions when ped'orming maintenance to the PowerMate. WARNING Electrical Shock Or Personal Injury Hazard Disconnect electrical supply before performing maintenance to the vacuum cieanero Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting, TO REMOVE BELT 1. Turn PowerMate upside down 2. Unscrew the two (2) PowerMate cover screws 3. Turn PowerMate right side up Press handle release pedal and lower the swivel Lift rear latches up Side Latch ear Latches 4. To remove cover, grasp the sides and pull ouL 5o Lift agitator assembly out and remove worn belt. TO CLEAN AGITATOR: NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacuum cleaner, the ggjtator mu be.._!eaned eyer_ time the belt is The agitator must also be cleaned according to the following schedule: Vacuum Cleaner Use Clean Aqitator HEAVY (used daily) every week MODERATE (used 2-3 timestweek) LIGHT (used 1 timelweek) every month every 2 months IMPORTANT Disconnect vacuum cleaner from electrical outlet° Check and remove hair, string and lint build-up frequently in the PowerMate agitator and end cap areas. Remove any dirt or debris in the belt path area or in the brush roller area. Carefully remove any string or debris located on the agitator or end caps. AGITATOR ASSEMBLY End Cap Belt Path 6o Check and _'--End Cap clean end cap areas. See AGITATOR ASSEMBLY for picture of complete agitator assembly. 17 Brush Unit End Cap.I
![](/manual_guide/products/kenmore-27515-owners-manual-b097e43/17.png)