Kenmore 32646 Owners Manual - Page 13
Tighten, connection.
View all Kenmore 32646 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
LIFT OUT TABTO UNCLIP TERMINAL COVER FROM THERMOSTAT JACK_ TERMINAL COVER THCELRIMPPOESDTATTOAT_ THIS POINT _ _-, PLASTIC TABS ON t BOTH SIDES OF TERMINAL COVER HOL IT IN PLACE tHBERRAMCOKSETTAT _-TANK THERMOSTAT _'_ " ELEMENT FIGURE 16. 8. Tightenterminals2 and3 to ensureproperelectrical connection. Fire and E×plosion Hazard • Failure to tighten screws can cause a fire. • Failure to do this could result in death, serious bodily injury, or property damage. 5. Remove the screws from terminal 2 of the element, and move the looped end of the wire aside. Failure to tighten terminal screws can cause result in DEATH, SERIOUS BODILY INJURY, DAMAGE. a fire which can OR PROPERTY 9. Replace terminal cover on thermostat making sure that the locking tabs on the terminal cover are in place. FIGURE 17. 6. The buss bar is labeled 5500 W. Place the buss bar over terminals 2 and 3 with the 5500 W visible. Install the extra screw provided into terminal 3. Fire and E×plosion Hazard = Thermostat must be flush againstthe tank. Make sure terminal cover is in place and the insulation replaced. e Failure to do this could result in death, serious bodily injury, or property damage. FIGURE 18. 7. The wire removed from terminal 2 has a looped end. It must remain looped and now be placed (as shown) on top of the buss bar, over the opening of terminal 2, and secured using the remaining screw. Make sure the thermostat is flush against the tank, the terminal cover is in place, and the insulation is replaced. Failure to do so can result in DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE. 10. Replace the insulation cap with handle so that it completely covers the thermostat and element. Q FIGURE 19. 13 FIGURE 20.