Kenmore 3711 Owners Manual - Page 12
Warning, Remove, Replace, Or Brushroll
View all Kenmore 3711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
WARNING Electrical Shock and Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. TO REMOVE BELT Lay cleaner flat and flip cleaner to expose nozzle base, To remove nozzle guard, use phillips screwdriver to remove the 6 screws. Arrows indicate location of screws. TO REPLACE BELT OR BRUSHROLL O \ borldushbreoltll., Dispose of _ i Lift and remove Place new belt in area of brushroll without bristles. Slide belt onto shaft, Lift the nozzle guard and pull off. 12 With new belt in place, pull and slide brushroll into nozzle making sure that the brushroll end caps are in the correct orientation (see diagram for end cap orientation). Rotate brushroll manually to make sure belt is properly aligned. Rotate front wheel \ assembly toward agitator, locating wheels in wheel pockets. Hold in place while replacing nozzle guard. Install 6 screws,