Kenmore 4472 Use and Care Guide - Page 6

Door Removal

Page 6 highlights

DOOR REMOVAL if door must be removed : 1. Gently lay refrigerator on its back, on a rug or blanket. 2. Remove two base screws and base panel. 3. Remove bottom hinge screws. 4. Remove plastic top hinge cover. 5. Remove screws from top hinge. 6. Remove top hinge from cabinet. 7. Remove door and bottom hinge from cabinet. 8. To replace door, reverse the above order and securely tighten aIJ screws to prevent hinge slippage. TO ADJUST CANTILEVER SHELVES Lift front edge up= Pull shelf out= Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position. COOL DOWN PERIOD For safe food storage, allow 4 hours for the refrigerator to cooJ down compIetety= The refrigerator wiJJrun continuously for the first several hours. TEMPERATURECONTROL The temperature controI is located inside the refrigerator compartment. The temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. If a colder temperature is desired, turn the temperature control knob toward COLDEST ...... and allow several hours for temperatures to stabilize between adjustments. Cold Control MID LEVEL LIGHTING The lights come on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Remove the lens from the lamp housing by unsnapping it from the lamp housing using your fingers or a screwdriver. Be careful not to break the locking tabs on the lamp housing. Replace the old bulb with a bulb of the same type and wattage. To replace the lens, snap one side of the lens opening to the tab on the lamp housing. Then carefully attach the other side. To Remove Light Lens Press Tabs in Direction Shown. iNTERIOR LIGHTING The lights comes on automatically when the door is opened. To replace the light bulb, turn the temperature controI to OFF and unpmug the emectrieamcord. RepJace the old bulb with a bulb of the same wattage. ADJUSTABLE INTERIOR SHELVES Mid Level Ughting Multi-position adjustable interior shelves can be moved to any position for larger or smaller Lift up packages. The shipping spacers that stabilize the shelves for shipping may be removed and discarded= Adjustable Interior Shelves - Upright Models DOOR STORAGE Door bins, shelves, and racks are provided for convenient storage of jars, bottles, and cans. Frequently used items can be quickly seJected= Some models have door racks or bins that can accommodate gallon-sized plastic drink containers and economy-sized jars and containers. The dairy compartment, which is warmer than the general food storage section, is intended for short term storage of cheese, spreads, or butter.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

DOOR REMOVAL
TO
ADJUST
CANTILEVER
SHELVES
if
door
must
be removed
:
1.
Gently
lay refrigerator
on its back, on a rug or blanket.
2.
Remove
two base screws
and base panel.
3.
Remove
bottom
hinge
screws.
4.
Remove
plastic
top hinge cover.
5.
Remove
screws
from top hinge.
6.
Remove
top hinge from cabinet.
7.
Remove
door
and bottom hinge from cabinet.
8.
To replace door, reverse
the above order and securely
tighten
aIJ screws
to prevent
hinge slippage.
Lift front edge up=
Pull shelf out=
Replace
the shelf
by
inserting the hooks at rear of
the shelf into the wall
bracket.
Lower the shelf into
the desired
slots and lock
into position.
COOL
DOWN
PERIOD
For safe food storage,
allow 4 hours for the refrigerator
to
cooJ down compIetety= The refrigerator
wiJJrun continuously
for the first several
hours.
TEMPERATURECONTROL
The temperature
controI is located
inside the refrigerator
compartment.
The temperature
is factory
preset to provide satisfactory
food storage
temperatures.
However,
the temperature
control
is adjustable
to provide a range of
temperatures
for your personal
satisfaction.
If a colder temperature
is desired,
turn the
temperature
control
knob toward
COLDEST
......
and allow several
hours
for temperatures
to
stabilize
between
adjustments.
Cold
Control
iNTERIOR
LIGHTING
The lights comes on automatically
when the door is opened.
To
replace the light bulb, turn the temperature
controI to OFF and
unpmug the emectrieamcord.
RepJace the old bulb with a bulb of
the same wattage.
ADJUSTABLE
INTERIOR
SHELVES
Multi-position
adjustable
interior
shelves
can be moved to any
position
for larger or smaller
packages.
The shipping
spacers
that stabilize
the shelves
for
shipping
may be removed
and
discarded=
Lift up
Adjustable
Interior Shelves - Upright Models
MID LEVEL
LIGHTING
The lights come on automatically
when the door is opened.
To replace the light bulb, turn the temperature
control to
OFF and unplug
the electrical
cord.
Remove the lens
from the lamp housing by unsnapping
it from the lamp
housing using your fingers or a screwdriver.
Be careful not
to break the locking tabs on the lamp housing. Replace the
old bulb with a bulb of the same type and wattage. To
replace the lens, snap one side of the lens opening to the
tab on the lamp housing. Then carefully attach the other
side.
To Remove
Light Lens
Press Tabs
in Direction
Shown.
Mid Level
Ughting
DOOR STORAGE
Door bins, shelves,
and racks are provided
for convenient
storage
of jars, bottles, and cans. Frequently
used items can be
quickly
seJected=
Some
models
have door racks or bins that can accommodate
gallon-sized
plastic
drink containers
and
economy-sized
jars
and containers.
The dairy compartment,
which is warmer
than the general
food
storage
section,
is intended
for short term storage
of cheese,
spreads,
or butter.