Kenmore 4802 Use and Care Manual - Page 10

Setting

Oven

Controls

(cont'd)

To Set or Change

the Temperature

for

Baking

The oven can be programmed

to bake at any temperature

from 170°F to 550°F (77°C to 287°C).

To Set the Controls

for Baking:

1.

Press

....

appears

in the display.

2.

Within 5 seconds,

press the _,,, or V.

The display will show "350°F

(177°C) ''. By pressing and holding the _,_. or V

, the temperature

can then be adjusted

in 5°F increments

(1°C if the control

is set to display Celsius).

3.

As soon as the _

or V

pad is released, the oven will begin heating to the selected temperature.

When the

displayed temperature

reaches the desired baking temperature,

the preheat indicator light will turn OFF and the

control will beep 3 times.

4.

To cancel baking, press

so_

To Change

the Oven Temperature

after

Baking

has Started:

1.

Press

and make sure the bake temperature

is displayed.

2.

Press the _

or _"

pad to increase or decrease

the set temperature.

To Set Control

for

Continuous

Bake

or

12 Hour

Energy

Saving

The oven control has a built-in

12 Hour Energy Saving feature that will shut off the oven if the control

is left on for more

than 11 hours and 59 minutes, The oven can be programmed

to override this feature for continuous

baking,

To

set

control

for continuous

baking:

h r"

1.

Press and hold

down for 5 seconds

until tone is heard, "----

will appear

in display for continuous

cooking.

The current time of day will return to the display.

2.

To cancel the Continuous

Bake function,

press s

and hold for 5 seconds until tone is heard. "12hr"

will appear in

display indicating that the control

has returned to the 12 Hour Energy Saving feature.

To Set Control

for

Oven

Lockout

The control can be programmed

to lock the oven door and lockout the oven control pads.

To set Control

for Oven

Lockout

feature:

1. Press _so_ and hold for 3 seconds. "Loc" will appear

in display, the "Door Locked" indicator

light will flash and the

motor driven door lock will begin to close automatically.

DO NOT open oven door

while the indicator

light is flashing.

Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear

in

the display.

S"OP

2.

To cancel the Oven Lockout feature, press

...........

and hold for 3 seconds. The control will unlock the oven door and

resume normal operation.

10

Kenmore 4802 Use and Care Manual - Page 10

Controls, cont'd

Page 10 highlights