Kenmore 54501 Owners Manual - Page 11

Thedehumidifiemr aybeoperatingabnormallwyhen: Dehumidifier doesnotstart Dehumidifiedroes notdrytheairas it should Dehumidifsieerems toruntoomuch Frostappearson thecoils Wateronfloor Dehumidifier operates continuously • Makesurethedehumidifpielur gispushed completeinlytotheoutlet. • Chectkhehousefuseorcircuibt reakebroxand replactehefuseorresetthebreaker. • Thedehumidifaieurtomaticatullrynsoffwhen thisoccursE.mpttyhebucket. • Makesurethebuckeist intherighpt lace. • Pressthe @ humiditcyontrobluttonto lowetrhehumiditsyettingbelowroomlevel. • Unit has 2 minute delay once power is restarted. • When first installed, allow at least 3 or 4 days to achieve and maintain the desired dryness. • Make sure there are no curtains, blinds or furniture blocking the front or back of the dehumidifier. • Press the @ Humidity Control button to lower the humidity. • Check that all doors, windows and other openings are securely closed. • Install the dehumidifier away from the dryer. The dryer should be vented to the outside. • The50 pintmodel(54501m) aynotoperateefficientlyif theroomtemperatureis below65°F(18°C). • The 70 pint Low Temperature model(54701) may not operate efficiently if the room temperature is below 42 F(6°C). • Refer to the Selection Guide on page 6. • Close all doors and windows to the outside. • This is normal. Frost will usually disappear within 60 minutes. • Ensure that the room temperature is at the minimum of 65°F(18 C) or 42°F(6°C). • Check the hose if one is attached. • Ensurebucket is properlypositioned. • Press @ to raisehumiditysettingto 35%or above. See page 7. [ Press the @ humidity control button to change the humidity higher setting than room level, highest humidity is 70%. -11 -