Kenmore 6817 Use and Care Guide - Page 8

Full-length Trim

Get Kenmore 6817 - 20.6 cu. Ft. Top Freezer Refrigerator PDF manuals and user guides View all Kenmore 6817 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

TO REMOVE FREEZER HANDLE: (Handles may be easier to reverse while doors are off.) 1. Remove two screws attaching handle to bottom of freezer door. 2. Swing bottom of handle away from the door and slide handle straight up and off of dovetail button. 3. Remove screw and dovetail button and install on other side, moving hole plugs from corresponding holes to opposite side. TO ATTACH FREEZER HANDLE: 1. Start with handle offset away from door. Place top of handle over dovetail button, swing handle into an upright position and pull downward, locking it into place. 2. Secure bottom of handle with two screws removed earlier. TO REMOVE REFRIGERATOR HANDLE: (Handles may be easier to reverse while doors are off.) 1. Remove two screws attaching handle to top of refrigerator door. 2. Swing top of handle away from door and slide handle down and off of dovetail button. 3. Remove screw and dovetail button and install on other side, moving hole plugs from corresponding holes to opposite side. TO ATTACH REFRIGERATOR HANDLE: 1. Start with handle offset away from door. Place bottom of handle over dovetail button, swing handle into an upright position and pull upward, locking it into place. 2. Secure top of handle with screws. TO ATTACH TRIM: 1. Slide both trim locks out of trim. 2. Insert new adhesive trim locks contained in your literature pack. byii 3. install trim to handle by sliding over base of handle. Carefully align trim and press down at trim lock locations. 4. Replace hole plug on opposite side. Use rubbing alcohol to remove any adhesive residue from old trim lock locations. TRIM REMOVAL (FULL-LENGTH TRiM MODELS ONLY) in some models, the refrigerator door has a full length trim piece which continues from the bottom of the handle to the bottom of the door. The top of the trim fits around the base of the handle. An adhesive '_rim lock"is positioned about halfway down. The bottom of the trim is held in place by either an adhesive trim lock, or a trim lock with two prongs inserted into a hole on the face of the door. TO REMOVE TRIM: 1. Remove trim by gently pulling trim lock areas out and away from door. 2. When trim is free from door, slide the trim straight down and away from base of handle. Dovetaim Lock Handb Handle Over Dovetail Adhesive Lock Full Trim

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
TO
REMOVE
FREEZER
HANDLE:
(Handles may be easier to reverse while doors are off.)
1.
Remove two screws attaching
handle to bottom of
freezer door.
2.
Swing bottom of handle away from the door and slide
handle straight up and off of dovetail button.
3.
Remove screw and dovetail button and install on other
side, moving hole plugs from corresponding
holes to
opposite side.
TO
ATTACH
FREEZER
HANDLE:
1.
Start with handle offset away from door. Place top of
handle over dovetail button, swing handle into an upright
position and pull downward,
locking it into place.
2.
Secure bottom of handle with two screws removed earlier.
TRIM
REMOVAL
(FULL-LENGTH TRiM
MODELS
ONLY)
in
some models, the refrigerator
door has a full
length
trim
piece which continues from the bottom of the handle to the
bottom of the door. The top of the trim fits around the base of
the handle. An adhesive '_rim
lock"is
positioned about halfway
down. The bottom of the trim
is
held
in
place by
either
an
adhesive trim
lock,
or a trim lock with two prongs
inserted
into
a hole on the face of the door.
TO
REMOVE
TRIM:
1.
Remove trim by gently pulling trim
lock
areas out and
away from door.
2.
When trim
is
free from door, slide the trim straight down
and away from base of handle.
TO
REMOVE
REFRIGERATOR
HANDLE:
(Handles may be easier to reverse while doors are off.)
1.
Remove two screws attaching handle to top of
refrigerator door.
2.
Swing top of handle away from door and slide handle
down and off of dovetail button.
3.
Remove screw and dovetail button and install on other
side, moving hole plugs from corresponding
holes to
opposite side.
TO
ATTACH
REFRIGERATOR
HANDLE:
1.
Start with handle offset away from door. Place bottom
of handle over dovetail button, swing handle into an
upright position and pull upward, locking it into place.
2.
Secure top of handle with screws.
TO
ATTACH
TRIM:
1.
Slide both trim locks out of trim.
2.
Insert new adhesive trim locks contained in your literature
pack.
byii
3.
install trim to handle by sliding over base of handle.
Carefully align trim and press down at trim lock locations.
4.
Replace hole plug on opposite side. Use rubbing alcohol
to remove any adhesive
residue from old trim lock
locations.
Dovetaim
Lock Handb
Handle
Over
Dovetail
Adhesive
Lock
Full
Trim