Kenmore 7830 Use and Care Guide - Page 12

Replacing, Refrigerator, Right Door, Left Door

Get Kenmore 7830 - 22.6 cu. Ft. Trio Bottom Freezer Refrigerator PDF manuals and user guides View all Kenmore 7830 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

2. Replacing Refrigerator Door • Right Door • Lower the door onto the middle hinge pin (7). • Make sure the door is aligned with the cabinet. • Replace the top hinge (4) installing hinge screws (3) to secure it. • Make sure the gasket on the door is flush against the cabinet and is not folded. • Support the door on the handle side while securing. And make sure the door is straight and the gap between the doors is even across the front. • Install the ground screw (6). • Connect the door switch wire (2). • Tighten the cover screw (1). • Left Door • Lower the door onto the middle hinge pin (5). • Make sure the door is aligned with the cabinet. • Replace the top hinge (4) installing hinge screws (3) to secure it. • Make sure the gasket on the door is flush against the cabinet and is not folded. iE • Support the door on the handle side while securing. And make sure the door is straight and the gap between the doors is even across the front. • Connect the door switch wire (2). • Tighten the cover screw (1). 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
2. Replacing
Refrigerator
Door
•
Right Door
• Lower the door onto the middle hinge pin (7).
• Make sure the door is aligned with the cabinet.
• Replace the top hinge (4) installing hinge
screws (3) to secure it.
• Make sure the gasket on the door is flush
against the cabinet and is not folded.
• Support the door on the handle side while
securing. And make sure the door is straight
and the gap between the doors is even across
the front.
• Install the ground screw (6).
• Connect the door switch wire (2).
• Tighten the cover screw (1).
•
Left Door
• Lower the door onto the middle hinge pin (5).
• Make sure the door is aligned with the cabinet.
•
Replace the top hinge (4) installing hinge
screws (3) to secure it.
• Make sure the gasket on the door is flush
against the cabinet and is not folded.
• Support the door on the handle side while
securing. And make sure the door is straight
and the gap between the doors is even across
the front.
• Connect the door switch wire (2).
• Tighten the cover screw (1).
i
E
12