Kenmore 7851 Use and Care Guide - Page 12

Caution

Get Kenmore 7851 - 25.0 cu. Ft. Bottom-Freezer Refrigerator PDF manuals and user guides
UPC - 719192615878
View all Kenmore 7851 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Reinstalling the Refrigerator Door I_ Right Door 1. Lower the door onto middle hinge pin (8). 2. Fit top hinge (5) over hinge lever latch (6) and into place. Insert hinge lever (4) under lever latch. Rotate lever counterclockwise to secure hinge. 3. Connect wire harnesses (3). 4. Hook tab on door switch side of cover under edge of wire opening in cabinet top. Position cover (2) into place. Insert and tighten cover screw (1). I_ Left Door 1. Lower the door onto middle hinge pin (9). 2. Fit top hinge (7) over hinge lever latch (8) and into place. Insert hinge lever (6) under lever latch. Rotate lever clockwise to secure hinge. 3. Install the grounding screw (5) and connect the three wire harnesses (4). 4. Push the water supply tube into the hole on the top case and pull it out on the backplate. 5. Insert the water supply tube (3) into the connector tube until you see only one scale mark. (Fully insert the tube over 5/8"(15mm)). 6. Hook tab on door switch side of cover (2) under edge of wire opening in cabinet top. Position cover into place. Insert and tighten cover screw (1). CAUTION Collet Tube Insert Line Clip After inserting, pull the tube to ascertain that it is secure and assemble the clip. Correct Incorrect 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Reinstalling
the Refrigerator
Door
I_
Right Door
1.
Lower the
door onto middle
hinge
pin
(8).
2.
Fit top hinge (5)
over
hinge
lever latch
(6)
and
into
place.
Insert hinge
lever
(4)
under lever latch.
Rotate
lever
counterclockwise
to secure hinge.
3. Connect wire harnesses
(3).
4. Hook tab on door switch side of cover under edge of wire opening
in cabinet top. Position cover (2) into place. Insert
and tighten cover screw (1).
I_
Left Door
1. Lower the door onto middle hinge pin (9).
2. Fit top hinge (7) over hinge lever latch (8) and into place. Insert hinge lever (6) under lever latch. Rotate lever clockwise
to secure hinge.
3. Install the grounding
screw
(5) and connect the three wire harnesses
(4).
4. Push the water supply tube into the hole on the top case and pull it out on the backplate.
5. Insert the water supply tube (3) into the connector
tube until you see only one scale mark.
(Fully insert the tube over 5/8"(15mm)).
6. Hook tab on door switch side of cover (2) under edge of wire opening
in cabinet top. Position cover into place. Insert
and tighten cover screw (1).
CAUTION
Collet
Tube
Insert Line
Clip
After inserting, pull the tube to
ascertain that it is secure and
assemble the clip.
Correct
Incorrect
12