Kenmore 7965 Installation Manual - Page 4
Uninstalling, dryer - washer
UPC - 883049149400
View all Kenmore 7965 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
DRYER INSTALLATION (See page 3 for washer instructions.) O Insert the T-clip of the 4 retainers into the dryer base as shown. Press up on the back of the clip and pull outward to lock into I)lace. Q Move the dryer to the desired location. NOTE: The appliance and pedestal assembly must be placed on a solid and level floor for proper operation. Adjust the legs of the pedestal using the wrench supplied. Tighten the lock nuts with the wrench. O Position dryer on top of the pedestal. NOTE: Because of the weight of the dryer, two or more people may be needed. ['_-... f_orr dWrySehr r for washer O Make sure the holes on the pedestal align with the holes in the appliance, then install 4 screws at each corner to securely attach the appliance to the pedestal. NOTE: If the screws are not installed properly, noise and vibration ma_ result. Lock nut Adjustable feet NOTE: If dryer was previously installed, uninstall it as follows: A. Uninstallingan electric dryer: 1) Unplug the power supply cord, 2) Pull the dryer away from the wall enough to loosen the vent clamp, Loosen the clamp and carefully remove the exhaust vent from the dryer exhaust outlet, B. Uninstallinga gas dryer: 1) Unplug power supply cord. 2) Turn off the gas supply. 3) Pull the dryer away from the wall enough to loosen the vent clamp. Loosen the clamp and carefully remove the exhaust vent from the dryer exhaust outlet. i J 4