Kenmore 9757 Use and Care Guide - Page 14
that attach to the inner door hinge
View all Kenmore 9757 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
5. Rotate outer door 180 °. 180 ° 6. Reassemble the inner and outer door assemblies with the 6 screws. Reverse hinge 1. Use a small flat-blade screwdriver to remove 2 plug strips from the inner door. Slide the head of the screwdriver under the plugs, being certain not to scratch the inner door surface. Lift up. Reverse the strike 1. Use a small flat-blade screwdriver to remove plug strip from the dryer door opening. Slide the head of the screwdriver under the plugs, being certain not to scratch the dryer surface. Lift up. 2. Remove the strike 3. Insert strike on the opposite side. ® 2= Remove the 4 screws that attach to the inner door hinge and move the hinge to the other side. Reinstall the 4 screws. ® A. Door hinge 3. Reinstall plug strips on opposite side of the inner door. 4. Check for fingerprints on the glass. Clean glass if necessary. 5. Place the inner door assembly inside the outer door assembly. To fit correctly, the inner door assembly edge fits completely inside the outer door assembly edge. A. Plug strip (cannot be seen from this angle) B. Door strike Reinstall the door 1. Reattach door to dryer front panel with the 4 screws. A. Dryer front panel B. Door assembly 2. Check for fingerprints on the glass. Clean glass if necessary. 3. Close door and check that it latches securely. 14