Kenwood 8402 Instruction Manual - Page 4
Connection
View all Kenwood 8402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Connection 2WARNING To prevent fire caused by a short in the wiring, connect a fusible link or breaker nearby the battery's positive terminal. 2CAUTION • If sound is not output normally, immediately turn power off and check connections. • Be sure to turn the power off before changing the setting of any switch. • If the fuse blows, check wires for shorts, then replace the fuse with one of the same rating. • Check that no unconnected wires or connectors are touching the car body. Do not remove caps from unconnected wires or connectors to prevent short circuits. • Connect the speaker wires to appropriate speaker connectors separately. Sharing the negative wire of the speaker or grounding speaker wires to the metal body of the car can cause this unit to fail. • After installation, check that the brake lamps, winkers, and wipers work properly. NOTE • Do not connect cables and leads to both RCA cable input jacks and the speaker level input terminals simultaneously, for this may cause malfunction or damage. * Commercially available parts ■ RCA cable or Speaker level input connection • RCA cable Connections CENTER UNIT (CD receiver, etc.) RCA cable ground terminal '.$ Power control wire RCA cable* A channel input B channel input • Speaker level input Connections Cable Color of the connector A channel 9 White Left · White/Black A channel 9 Gray Right · Gray/Black B channel 9 Green Left · Green/Black B channel 9 Purple Right · Purple/Black Genuine-accessory car stereo (No line output center unit etc.) Car fuse box ACC Battery 4 English ■ Power wire and Speaker wire connection Power control wire Lead terminal* Terminal cover Battery wire* Protective Fuse* Battery Ground wire* B channel Right speaker B channel Left speaker A channel Right speaker A channel Left speaker ■ Bridged Connections B channel Speaker (Bridged) A channel Speaker (Bridged)