Kenwood AS-50BT-B Operation Manual - Page 23
Troubleshooting, Maintenance and care
View all Kenwood AS-50BT-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
6. Troubleshooting Notes on troubleshooting Problem Solution No function • Is the battery empty? Charge the battery. • Has the loudspeaker switched off automatically? No sound • Has the volume been turned down all the way? Increase the volume on the playback device, if needed. No BLUTOOTH connection • Are the playback device and the loudspeaker paired? • Is a plug plugged into the AUX-IN socket? Poor sound quality in BLUTOOTH mode • Is the interrupting objected between the playback device and the loudspeaker? This can be, e.g. walls or other electronic devices. If needed, change the location of the playback device or the loudspeaker. • Is the playback device too far away from the loudspeaker? Please bring the two device close to each other. • Increase the volume on the playback device. • Is the charge level of the battery too low? 7. Maintenance and care Cleaning the housing: Use a cloth lightly moistened with a mild detergent. Do not use detergents containing alcohol, ammonia or scouring agents. Cautions on condensation Condensation (dew) may form inside the unit if there is a significant difference between the temperature of the unit and the ambient temperature. If condensation occurs inside the unit, proper function is no longer guaranteed. In this case, you have to wait a few hours; After the moisture has dried, the device can be reused. Special care should be taken in the following circumstances When the unit is moved from one place to another at a much higher or lower temperature, or when the humidity at the installation site increases, etc. 9