Kenwood CA-GRL98SG Operation Manual - Page 2

Fairing Metal Mesh Speaker Grilles Installation Instructions NOTE: The mesh parts in this kit are designed to replace the front speaker grille cloth on 1996-2013 HD Street Glides, Ultras, Classics, and Standards. Installation procedure 1. Remove your outer fairing. NOTE: A towel or something similar is suggested to be placed over your front fender to help in preventing dings or scratches during installation. 2. Remove the speaker/grille assembly from the bike. NOTE: The factory grille cloth is glued to a plastic mesh, and together, is two-way taped to the main body of the grille assembly. You can usually peel away the mesh from the body of the grille by hand. With the factory grille cloth/mesh off, you should see the exposed two-way tape used to hold the factory mesh on the main grille body. In most cases, the factory two-way tape will hold the new mesh in place, but the new two-way tape is supplied in the box if you need it (most adhesives work best at room temperature or higher). 3. Take a moment and ensure the new mesh is oriented so everything lines up properly and then re-install the speaker/grille assembly into the fairing. NOTE: For custom applications, the metal mesh is thick enough that it should not warp during powder coating, polishing, chroming, or other similar processing. For updated information (the latest Instruction Manual, etc.), please visit the following website: https://manual.kenwood.com/en_contents/search/