Kenwood CD-4700M User Manual - Page 6
Connecting to Other Devices
View all Kenwood CD-4700M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Chapter 1 Chapter 2 Connecting to Other Devices Connecting to Other Devices Make connections as shown below. 6 When connecting the related system components, refer also to the instruction manuals of the related components. Do not plug in the power lead until all connections are completed. DIGITAL OUT jack (OPTICAL) Remove the protective cap before using the DIGITAL OUT jack. Digital component (MD,DAT, etc.) DIGITAL OUT OPTICAL TEXT Remove the cap DIGITAL INPUT (OPTICAL) Optical digital cable (Commercially-avaliable) OUTPUT R L *1 DIGITAL OUT OPTICAL TEXT SYSTEM CONTROL SL16 TEXT RS 232C D-Sub 9 pin connector To wall AC outlet System control cable RS-232C cable "Reverse type" (Commercially-avaliable) Communication cable Optical digital cable (Commercially-avaliable) SYSTEM CONTROL TEXT OPTICAL Chapter 3 Chapter 4 Chapter 5 Chapter 6 Connect a PC to use the PC LINK function. Audio cable CD Receiver or Amplifier, etc. * 1 Note on the SL16 TEXT jack When using a KENWOOD Receiver equipped with the SL16 TEXT jack, connect it to the Receiver using the communication cable provided with this unit. This makes it possible to display the disc and track titles on the LCD remote control unit (provided with the Receiver). Note If your receiver has the SL16/XS8 mode select switch, set the connected receiver to the [SL16] mode. DTS Disclaimer clause When playing DTS-encoded CDs, excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the CD player is connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the CD player. Notes 1. Connect all cables firmly. If connections are loose, there could be loss of sound or noise produced. 2. When plugging and unplugging connection cables, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection cables without removal of the power cable can cause malfunctions or damage to the unit. Chapter 7