Kenwood CMOS-310 User Manual - Page 8
Camera Setting CMOS-310 only
View all Kenwood CMOS-310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Camera Setting (CMOS-310 only) Switch Unit Operation The switch unit can be used to switch the image display mode, view/hide the guideline display and adjust the camera. View button • Switches the image display mode. • Select an item in the setting mode. • Press and hold to display or hide the guidelines. +/− button Moves across the setting mode items or sets an adjustment value. Camera Setting Procedure 1 Complete all of the required connections in advance. 2 Display the camera video. Some video monitors may switch automatically to the external video input function. For details, read the instruction manual for your video monitor. 3 Press and hold the view and + buttons of the switch unit simultaneously to enter the camera adjustment mode. 4 First select the positioning of the camera. Preparation Before Camera Setting 1 Stop the vehicle. In a parking space with white lines and tire stoppers, park the vehicle in the center of the white line frame. 2 Advance the vehicle. • Move the vehicle forward until the entire parking space can be viewed in the camera image. • Be sure to apply the parking brake and push the brake pedal so that the vehicle is completely stationary. Perform the setting in a place that will not cause nuisance to other people. 8 | CMOS-310/CMOS-210 Use the + or - button to select an item and press the view button to enter the selection. • When using the camera as the rearview camera, select [OK]. • When using the camera as the front camera, select [Switch to Normal Image Display] and then select [OK]. • Selecting [Reset All] resets all of the camera settings to the defaults. 5 Select a camera adjustment item and adjust it. The following items are available for camera adjustment. 1. Overhead view image adjustments (Centering, Right-and-Left angle, Up-and-Down Angle) 2. Wide view guideline adjustments (Size, Horizontal direction, Vertical direction, Red Line Position Setting) To select an item: Press the + or - button to select an item and press the view button to enter the selection. When an adjustment item is selected, the frame of its icon turns from blue to red. To adjust the item: After selecting the item, press the + or - button to adjust it and press the view button to enter the adjusted value. 6 End the setting.