Kenwood CX-DAB1 Operation Manual - Page 5

7 Match the protrusion of the amplifier B with the 5 on the antenna film A and paste. ■ Do not touch the feeder terminal or the pasting surface (adhesive side) of the amplifier. When installing the antenna on the right side Match the protrusion with 5 9 Wire the antenna cables. ■ Use cord clamper C to secure the antenna to the pillar at several locations. Notes Take the following precautions when passing the antenna cable inside the front pillar where the air bag is installed. - Install the amplifier part of the antenna cable in front or above the air bag so that the antenna and the air bag do not interfere. Earth sheet Antenna film A Amplifier B When installing the antenna on the left side Amplifier B Antenna film A Earth sheet Match the protrusion with 5 8 Remove the film covering the earth sheet and paste the earth sheet on the metal part of the vehicle. Provide sufficient leeway for the earth sheet so that it does not interfere with the interior parts (front pillar cover). Also take care that the interior parts do not interfere with the amplifier B. Amplifier B Front glass Front pillar Interior part Amplifier B Air bag Front pillar - The front pillar cover is secured with a special clip which may need to be replaced when the front pillar cover is removed. Contact your vehicle dealer for details on replacing the front pillar cover and availability of replacement parts. Interior part Clip 10Select the DAB antenna power is set to "ON" ■ You cannot receive DAB or DAB reception is poor when DAB antenna power is set to "OFF". ■ For details, see the your control unit instruction manual. Earth sheet English | 5