Kenwood DDX271 User Manual - Page 55

CONNECTION/INSTALLATION Connection
Connecting wires to terminals See page 56. See page 57. USB terminal: See page 56. See page 57.*1 Connect the antenna cord to the antenna terminal. 1 White / White with black stripe : To front speaker (left) Gray / Gray with black stripe : To front speaker (right) Green / Green with black stripe : To rear speaker (left) Purple / Purple with black stripe : To rear speaker (right) Blue (Antenna control wire) REVERSE Purple with white stripe (Reverse sensor wire) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. PRK SW Light green (Parking sensor wire) 3 10 A fuse Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. Connect SiriusXM Connect Vehicle Tuner (commercially available). See page 56.*2 *1 Only for DDX771/DDX491HD/DDX471HD/DDX371/DDX310BT/ DDX3071BT. *2 Only for DDX771/DDX491HD/DDX471HD/DDX371/DDX310BT/ DDX271. *3 If no connections are made, do not let the cable come out from the tab. *3 Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. (Max. 300 mA, 12 V) Blue with white stripe (Power control wire) Brown (Mute control wire) Light blue with yellow stripe (Steering remote control wire) Orange with white stripe (Dimmer control wire) When using the optional power amplifier, connect to its power control terminal. To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.) To use the steering wheel remote control feature, an exclusive remote adapter (not supplied) matching your car is required. To car light control switch Ignition key switch Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) (ACC) (BATT) (GND) To car chassis Fuse box Battery ENGLISH 55