Kenwood DDX3058 User Manual - Page 4

Connecting Wires to Terminals Bluetooth Microphone (Accessory 5) DDX4028BT/DDX4058BT only Purple/White Connect to vehicle's reverse lamp harness when using the optional rear (Reverse sensor wire) view camera. Antenna Cord Light Green Extension cable (Accessory 2) (Parking sensor wire) For best safety, be sure to connect the parking sensor. ⁄ Connect to the vehicle's parking brake detection switch harness. FM/AM antenna input (JASO) FUSE ( 10A ) Accessory 1 If no connections are made, do not let the cable come out from the tab. Light blue/Yellow (Steering remote control wire) To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. Blue/White (Power control/antenna control wire) To the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle. Brown (Mute control wire) To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.) Yellow (Battery wire) Red (Ignition wire) Red (A7) Yellow (A4) Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles You may need to modify the wiring of the supplied wiring harness as illustrated below. Red (Ignition wire) Red (A7) Unit Vehicle Connector A Connector B Yellow (Battery wire) Default wiring Yellow (A4) Pin A4 Yellow A5 Blue/White A6 Orange/White A7 Red A8 Black Colour and functions Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection Pin Colour and functions B1/B2 Purple+ / Purple/Black- Rear Speaker (Right) B3/B4 Gray+ / Gray/Black- Front Speaker (Right) B5/B6 White+ / White/Black- Front Speaker (Left) B7/B8 Green+ / Green/Black- Rear Speaker (Left) 4 DDX4028BT/DDX4058BT/DDX3028/DDX3058