Kenwood DDX319 Instruction Manual - Page 78
Connecting Wires to Terminals - acc
View all Kenwood DDX319 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Connecting Wires to Terminals Bluetooth Microphone (Accessory 9) DDX719/ DDX7049BT/DDX419/DDX4049BT only Purple/White (Reverse sensor wire) Antenna Cord Light Green Subwoofer Preout (monaural) Connect to vehicle's reverse lamp harness when using the optional rear view camera. Extension cable (Accessory 2) (Parking sensor wire) For best safety, be sure to connect the parking sensor. FM/AM antenna input Accessory 1 FUSE ( 10A ) ⁄ Connect to the vehicle's parking brake detection switch harness. White + / White/black - : To front speaker (left) Gray + / Gray/black - : To front speaker (right) Green + / Green/black - : To rear speaker (left) Purple + / Purple/black - : To rear speaker (right) If no connections are made, do not let the cable come out from the tab. Blue (Antenna control wire) Blue/White (Power control wire) Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the filmtype antenna. When using the optional power amplifier, connect to its power control terminal. Brown (Mute control wire) Light blue/Yellow (Steering remote control wire) To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.) To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. Orange/White (Dimmer control wire) To car light control switch Red (Ignition wire) ACC Ignition key switch Yellow (Battery wire) Black (Ground wire) - (To car chassis) Car fuse box (Main fuse) 78 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049 Battery