Kenwood DDX355 Operation Manual - Page 26
Other External Components
View all Kenwood DDX355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
OTHER EXTERNAL COMPONENTS Using external audio/video players-AV-IN When the operation buttons are not displayed on the screen, touch the area shown on the illustration. You can connect an external component to the AV-IN1 and iPod/AV-IN2 input terminals. (Page 52) Preparation: If you want to use "AV-IN2", select [AV-IN2] for setting. (Page 43) • No preparation is required for "AV-IN1". R Indications and buttons on the source control screen R Starting playback 1 Connect an external component to the AV-IN1 and iPod/AV-IN2 input terminals. 2 Select "AV-IN1" or "AV-IN2"as the source. (Page 9) 3 Turn on the connected component and start playing the source. Using a rear view camera • To use a rear view camera, a REVERSE lead connection is required. (Page 51) R Activating the rear view camera 1 Display the setting screen. On the screen: AV-IN name R Displaying the picture from the rear view camera The rear view screen is displayed when you shift the gear to the reverse (R) position. • To erase the caution message, touch the screen. To display the picture from the rear view camera manually DDX4025DAB/DDX4025BT/ DDX4055BT*1 DDX3025/DDX3055*2 (Hold) DDX355*2 Operation buttons [MODE] Changes the AV-IN name. • Press [H] or [I] to select an AV-IN name. • This setting does not affect the source name "AV-IN 1"/ "AV-IN 2" displayed on . [MENU] Displays the screen. 26 2 To deactivate: Select [Off] for . (Hold) (Hold) • When displaying the picture from the rear view camera manually, you can change the setting of the picture using [Zoom]/[Aspect]/[Adjust]. (Page 37) To exit the rear view screen: Press and hold the same button again. *1 This operation works only when is set to [R-CAM]. (Page 44) *2 This operation works only when is set to [R-CAM]. (Page 44)