Kenwood DDX4019BT Instruction Manual 2 - Page 23

Other External Components Using camera Install the front view camera or rear view camera (separately purchased) in the appropriate position according to the instructions supplied with your camera. Connecting the camera See page 43 for more information. • To use the rear view camera, a reverse lead (REVERSE) connection is required. (Page 44) Using the camera • For settings, see or on page 33. To display the rear view camera screen The rear view screen is displayed by shifting the gear to the reverse (R) position when is set to [ON]. (Page 33) • A caution message appears on the screen. To remove the caution message, touch the screen. You can also view the front view screen when you shift the gear from the reverse (R) position to any other positions. See on page 33. To display the camera screen manually • When is set to [ON], the picture from the front view camera is displayed. (Page 33) • When is set to [OFF], the picture from the rear view camera is displayed. (Page 33) On the pop-up short-cut menu, touch as follows: Operations while the camera screen is displayed To switch the screen between front view camera and rear view camera Touch the area shown below. To adjust the picture Touch the area shown below. Video menu control is shown. For details, see "Video menu control operations" on page 11. • To exit video menu control, touch the same area again. To display parking guidelines Set to [ON] (Page 33) or touch the area shown below. • To close the parking guidelines, touch the same area again. To exit the camera screen Press HOME on the monitor panel or touch the area shown below. Using an external navigation unit (Not applicable for Indonesian models) You can connect an external navigation unit (KNA-610 or KNA-G630: optional accessory) to the NAV input terminal so that you can view the navigation screen. (Page 43) • The navigation guidance comes out of the front speakers even when you are listening to an audio source. ENGLISH 21