Kenwood DDX419BT Instruction Manual 2 - Page 38
<System Information>, <Open Source Licenses>, <Steering Remote Control Setting> - update
View all Kenwood DDX419BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Settings Assign functions to the keys of the remote controller on the steering wheel. • This function is available only when your car is equipped with the electrical steering remote controller. • You can only register/change the functions while you are parked. • If your steering remote controller is not compatible, learning may not be completed and an error message may appear. • For connection, see page 43 for more information. 1 Touch [Set] for to display the setting screen. 2 Press and hold a button on the steering remote controller to register or change. 3 Select a function to assign to the selected button. Steering Remote Control Setting Please select the function to assign to the button. Done VOL VOL ATT SRC 5 Touch [Done] to finish the procedure. • The unit can register/change all of the buttons' functions at the same time. To do this, press all buttons in turn and after pressing all of them, touch [Done] on the screen. However, new functions cannot be learned after this operation. • When changing the functions already learned, touch the assigned function you want to change in step 3 and then touch to select the new function from the function list. • Confirm the contents of the settable functions in the function list. You cannot edit the function list. To initialize the setting: Touch [Initialize] for . • A confirmation message appears. Touch [Yes]. - To cancel the initialization, touch [No]. Update the system by connecting a USB device containing an update file. • To obtain the update file, visit . Updates the system application. Updates the system. • If you turn the power off then on or turn the ignition switch off then on after selecting , the unit will reset. Updates the DVD system application. The system update starts. It may take a while. If the update has been completed successfully, "Update Completed" appears, then reset the unit. • Do not disconnect the USB device while updating. • If the update has failed, turn the power off and then on, and retry the update. Shows the Open Source Licenses. Connect a USB device with the update file to the unit. 4 Repeat steps 2 and 3 to register other buttons. 36 ENGLISH