Kenwood DDX8046BT Instruction Manual - Page 74
Zone Control
View all Kenwood DDX8046BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Audio Control 4 Set the Graphic Equalizer DNX9/ DDX8 series 1 DNX7 series 1 Zone Control You can set the front and rear audio source. 1 Display the Zone Control screen Touch Zone Control]. (page 72) 2 Set the Zone Control 1 Gain level can be adjusted by touching the each frequency bar. [2], [3] Sets a frequency. [5], [∞] Sets a gain level. [EQ Init] Returns to the previous level which the gain level is adjusted. [Flat] Tone curve becomes flat. [Bass EXT] Bass Extend settings. When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5Hz. [SW Level] Adjusts the subwoofer volume. The setting is available when subwoofer is set to any item other than "None". See (page 94). [Single Zone] Sets the unit to single zone. [Dual Zone] Sets the unit to dual zone. [Front Source] Sets the front audio source. [Rear Source] Sets the rear audio source. ⁄ • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. [Rear VOL.] Adjusts the volume of the rear channel. 74 DNX series DNX9960/ DNX7160/ DNX7020EX