Kenwood DDX820WS Instruction Manual - Page 12
Security Code Setup, Calendar/clock settings, To change the security code
View all Kenwood DDX820WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Basic Operations Security Code Setup You can set up a security code to protect your receiver system against theft. When the Security Code function is activated, the code cannot be changed and the function cannot be deactivated. Note that the Security Code can be set with a 4 to 8 digit number of your choice. Preparation • Set [DEMO] to [OFF] in the Special screen (P.73). 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 3 Touch [Security]. hhSecurity screen appears. 4 Touch [Security Code Set] on the Security screen. hhSecurity Code Set screen appears. 5 Enter a security code with 4 to 8 digit number and touch [Enter]. 6 Enter the same code again and touch [Enter]. Now, your security code is registered. NOTE • Touch [BS] to delete the last entry. • If you enter a different security code, the procedure returns to step 5 (for first code entry). • If you have disconnected the Receiver from the battery, enter the correct security code as that you have entered in step 5 and touch [Enter]. You can use your receiver. To change the security code: 1 Touch [Security Code Change] on the Security screen. hhSecurity Code Set screen appears. 2 Enter the current registered security code and touch [Enter]. 3 Enter a new security code with 4 to 8 digit number and touch [Enter]. 4 Enter the same code again and touch [Enter]. The new security code is registered. To clear the security code: 1 Touch [Security Code Cancellation] on the Security screen. hhSecurity Code Set screen appears. 2 Enter the current registered security code and touch [Enter]. The security code is cleared. Calendar/clock settings 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 12