Kenwood DDX918WS Operation Manual - Page 81
Ddx918ws/ Ddx918wsm, P. Cont, Prk Sw, Reverse
View all Kenwood DDX918WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
●●DDX918WS/ DDX918WSM Fuse (15A) Connection/Installation Connect to the vehicle's parking brake detection switch harness. Light Green PRK SW (Parking sensor wire) (2 m) For best safety, be sure to connect the parking sensor. Purple/White (Reverse sensor wire) (2 m) REVERSE Connect to vehicle's reverse lamp harness when using the optional rear view camera. Accessory 1 If no connections are made, do not let the cable come out from the tab. Blue/White (Power control wire) P. CONT When using the optional power amplifier, connect to its power control terminal. (Max. 200mA, 12V) Green/White Green/Red CAM- CAM+ To CMOS-3xx series (Optional Accessory) camera control terminal Connect to vehicle's harness. Pin Color and function A1 Orange/White Dimmer A2 Yellow Battery A4 Red Ignition (ACC) A5 Blue [1] Antenna control A6 Black Earth (Ground) Connection A8/ A7 White (+) / White/Black (-) Front Left A10/ A9 Gray (+) / Gray/Black (-) Front Right B2/ B1 Green (+) / Green/Black (-) Rear Left B6/ B5 Purple (+) / Purple/Black (-) Rear Right *Speaker Impedance: 4-8 Ω [1] Max. 300mA, 12V English 81