Kenwood DDX920WDABS Instruction Manual - Page 104
Error Messages, Apple CarPlay
View all Kenwood DDX920WDABS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Troubleshooting Error Messages When you fail to operate the unit correctly, the cause of the failure appears as the message on the screen. There is an error in the speaker wiring. Please check the connections. Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. Wire or insulate the speaker cord as appropriate and turn the power off and on again. Hot Error When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit. Use the unit again after reducing the temperature of the unit. Mecha Error The disc player is malfunctioning. Eject the disc and try inserting it again. Contact the KENWOOD dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error An unplayable disc is inserted. Change the disc. See Playable Media and Files (P.105). Read Error The disc is quite dirty. Clean the disc. See Precautions on handling discs (P.6). Disc is upside down. Load the disc with the labeled side up. Region Code Error The disc you wanted to play has a region code that cannot be played with this unit. See Region Codes in the World (P.107) or try another disc. Error 07-67 The unit is not operating correctly due to some reason or other. Turn the power off and on again. If the "Error 07−67" message does not disappear, contact your nearest KENWOOD dealer. No Device (USB device) The USB device is selected as a source although no USB device is connected. Change the source to any source other than USB/ iPod. Connect a USB device, and change the source to USB again. Disconnected (iPod, Bluetooth audio player) The iPod/Bluetooth audio player is selected as a source although no iPod/Bluetooth audio player is connected. Change the source to any source other than iPod/ Bluetooth. Connect an iPod/Bluetooth audio player, and change the source to iPod/Bluetooth again. No Media file The connected USB device contains no playable audio file. Media was played that doesn't have data recorded that the unit can play. See Playable Media and Files (P.105) and try another USB device. The USB device which contains no playable audio file is selected. (DDX9020DABS / DDX920WDABS / DMX8520DABS) Switch USB devices. See [USB DEVICE CHANGE] (P.41). USB device over current status detected. The connected USB device is rated a current capacity higher than the allowable limit. Check the USB device. Some trouble may have occurred to the connected USB device. Change the source to any source other than USB. Remove the USB device. ÑÑApple CarPlay The GPS antenna must be connected to use Apple CarPlay wirelessly. Please verify the proper connections or plug in by USB to use Apple CarPlay. The GPS antenna is not connected when the Apple CarPlay is started by connecting wirelessly or when the iPhone compatible with wireless Apple CarPlay is registered in [Apple CarPlay Device List]. Check the connection of the GPS antenna or plug in over USB to use Apple CarPlay. The speed sensor and the GPS antenna must be connected to use Apple CarPlay wirelessly. Please verify the proper connections or plug in by USB to use Apple CarPlay. The speed pulse is not detected and the GPS antenna is not connected when the Apple CarPlay is started by connecting wirelessly or when the iPhone compatible with wireless Apple CarPlay is registered in [Apple CarPlay Device List]. Check the connection of the speed pulse and the GPS antenna or plug in over USB to use Apple CarPlay. 104