Kenwood DNX5120 Instruction Manual - Page 57
Crossover Network Setup, DVD Setup - software
UPC - 019048176585
View all Kenwood DNX5120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 1 2 2 4 3 1 Sets the High Pass Filter of the front speaker. 2 Sets the High Pass Filter of the rear speaker. 3 Sets the Low Pass Filter of the sub woofer. 4 Switches to the crossover setup screen. 2 Display the Crossover setup screen 3 Set the crossover 5 6 7 5 Sets the cross over frequency. When front speaker or rear speaker is selected in step 1: High Pass Filter adjustment When Subwoofer is selected in step 1 : Low Pass Filter adjustment 6 Sets the sub woofer phase. (Only when "Subwoofer" is set to "ON" in Audio Setup and "LPF SUB FREQ" is set to other than "Through") 7 Returns to the "Audio Setup" screen. DVD Setup You can set up the DVD play. 1 Display the DVD Setup screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 2 3 4 5 1 Moves to the "DVD Setup 2" screen. 2 Selects a disc menu language.*1 (See , page 58) 3 Selects a subtitle language.*1 (See , page 58) 4 Selects an audio language.*1 (See , page 58) 5 Sets the dynamic range.*1 ( "Wide") The dynamic range is reduced by changing from "Wide" to "Normal" and from "Normal" to "Dialog". "Dialog" makes the total sound volume becomes larger as compared with "Wide" and "Normal", allowing you to listen to the movie's dialog more clearly. This is effective only when you are using a Dolby Digital software. The operation is available during the play stop mode. Next page 3 English 57