Kenwood DNX5180BTS Instruction Manual - Page 58
To adjust the parking guidelines, Other External Components, To adjust, the parking guidelines P.58
View all Kenwood DNX5180BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Other External Components ■■[Rear Camera for Car interface] [ON]: Select when you connected an external system unit. Neither buttons nor titles are displayed. [OFF ](Default): Select when you connected a rear camera. ■■[Rear Camera Settings] *1 If you select [CMOS 3-Series Camera] for [Rear Camera], adjusts the CMOS-3xx series with ID 1 ("Rear Camera") set. For details, see the instruction manual of your camera. ■■[Parking Guidelines] You can display parking guidelines to enable easier parking when you shift the gear to the reverse (R) position. Default is "ON". ■■[Guidelines SETUP] If you select [ON] for [Parking Guidelines], adjust the parking guidelines. See To adjust the parking guidelines (P.58). ■■[Dashboard Camera /Front Camera] *1 [Dashboard Camera]: Select this when the dashboard camera is connected. [CMOS 3-Series Camera]: Select this when the CMOS-3xx series with ID 2 ("Front Camera") set is connected. [Other]: Select this when the other camera is connected. [OFF ](Default): Select this when no camera is connected. ■■[Front Camera Settings] *1 If you select [CMOS 3-Series Camera] for [Dashboard Camera /Front Camera], adjusts the CMOS-3xx series with ID 2 ("Front Camera") set. For details, see the instruction manual of your camera. ■■[Front Camera Mirror Image] *1 If you select [Other] for [Dashboard Camera /Front Camera]. [ON]: Displays the picture from the front view camera horizontally reversed. [OFF ](Default): Displays the picture from the front view camera as it is. • *1 Only for . To adjust the parking guidelines NOTE • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view camera. • When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. 1 Touch [ON] of [Parking Guidelines] in the Camera screen. (P.57) 2 Touch [Guidelines SETUP] in the Camera screen. 3 Adjust the parking guidelines by selecting the mark. 4 Adjusting the position of the selected mark. A C D B Make sure that A and B are horizontally parallel, and that C and D are the same length. NOTE • Touch [Initialise] and after touch [Yes] to set all the marks to the initial default position. 58