Kenwood DNX5330BTM User Manual 1 - Page 43

Return to the Top page Setting Up Travel Prayer for Safe Drive Setting (DNX7330BTM/ DNX5330BTM only) When this function is set, the prayer for driving safety is displayed when the unit is turned on, then Quran is played. 1 Touch [SET] of [Travel Prayer for Safe Drive] in the User Interface screen. Travel Prayer for Safe Drive Setting screen appears. 2 Set each item as follows. Touch panel adjustment 1 Touch [Touch] in the System Menu screen. Touch Panel Adjustment screen appears. 2 Follow the instruction on the screen and touch the center of each . Travel Prayer for Safe Drive Turns the Safe drive pray function on or off. Sound Volume Sets the sound volume of Quran. NOTE • To cancel the touch panel adjustment, touch [Cancel]. • To reset to the initial status, touch [Reset]. Security setup You can set up a security code to protect your receiver system against theft. NOTE • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Touch [Security] in the System Menu screen. Security screen appears. 2 Touch [ON] of [SI]. Return to the Top page Setting Up NOTE • If you enter a different security code, the screen returns to step 4 (for the first code entry). • If you have pressed button or if you have disconnected the Receiver from battery, enter the correct security code as that you have entered in step 4 and touch [Enter]. You can use your receiver. NOTE • If "SI" is turned on, the SI indicator on the sub panel flashes when the vehicle ignition is off and the panel is detached ( ). Default is "ON". 3 Touch [SET] of [Security Code Set]. NOTE • If you have already completed the code registration, [CLR] is displayed. 4 Enter a security code with four-digit number and touch [Enter]. 5 Enter the same code again and touch [Enter]. Security code is registered. 84 85