Kenwood DNX692 Instruction Manual 2 - Page 103
Camera Setup, Rear Camera, R-CAM Interruption, R-CAM Settings, Parking Guidelines, Guideline Setup
View all Kenwood DNX692 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Return to the Top page Setting Up Camera Setup You can set camera parameters. 1 Press the button/ volume knob. Popup menu appears. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Camera]. Camera SETUP screen appears. 4 Set each item as follows. Rear Camera*1 Selects the type of rear camera to use. CMOS-3xx: When the CMOS-300 series with ID 1 set is connected. Other (Default): When the other camera is connected. R-CAM Interruption Sets a method for switching the display. Setting values are ON and OFF. ON: Switches to the rear view camera video display when shifting to reverse. Or pressing the button for 1 second. OFF (Default): Switches to the rear view camera video display when pressing the button for 1 second. R-CAM Settings*2 Adjusts the CMOS-300 series with ID 1 set. For details, see the instruction manual of your camera. Parking Guidelines*3 You can display parking guidelines to enable easier parking when you shift the gear to the reverse (R) position. Default is "ON". Guideline Setup*3 Adjust the parking guidelines. See Adjusting the parking guidelines (P.103). Front Camera*1 Selects the type of front camera to use. CMOS-3xx: When the CMOS-300 series with ID 2 set is connected. Other: When the other camera is connected. OFF (Default): When the front camera is not used. F-CAM Settings*4 Adjusts the CMOS-300 series with ID 2 set. For details, see the instruction manual of your camera. *1 These settings become settable only when the parking brake is on. *2 This setting becomes settable only when the parking brake is on and the CMOS-300 series is selected. *3 This setting becomes settable only when the "Rear Camera" is set to [Other]. *4 This setting becomes settable only when the parking brake is on and "Front Camera" is set to CMOS-300 series. 102