Kenwood DNX771HD User Manual - Page 112
Operation, Controlling EQ curves, Controlling equalizer manually, DNX891HD, DNX7710BT
View all Kenwood DNX771HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Operation Controlling EQ curves 1 Select EQ curve from [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], [Powerful], [iPod], and [User]. NOTE • [iPod] is available only during iPod source. Controlling equalizer manually This setting cannot be performed when you select [iPod] in the Equalizer screen. 1 Touch [EQ] in the Equalizer screen. 2 Touch the screen and set the Graphic Equalizer as desired. DNX891HD, DNX7710BT, DNX691HD Return to the Top page Controlling Audio Gain level (light green boxed area) Adjust the gain level by touching the each frequency bar. Touching [2], [3], [5] and [∞] can also adjust the level. Use [2] and [3] to select a frequency, and [5] and [∞] to set the level. EQ INIT Returns to the previous level which the gain level is adjusted. Flat Tone curve becomes flat. Bass EXT (Bass Extend Settings) When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5 Hz. Loudness Sets the amounts of boost of low and high tones. DNX891HD, DNX7710BT, DNX691HD: "OFF", "Low", "High" DNX771HD, : "OFF", "ON" SW Level Adjusts the subwoofer volume. This setting is not available when subwoofer is set to "None". See Speaker setup (P.107). DNX771HD, 111