Kenwood DNX9190SM Instruction Manual 1 - Page 10
Security Code Setup, To change the security code
View all Kenwood DNX9190SM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Basic Operations Security Code Setup You can set up a security code to protect your receiver system against theft. When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 to 8 digit number of your choice. Preparation • Set [DEMO] to [OFF] in the Special screen (P.69). 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 3 Touch [Security]. hhSecurity screen appears. 4 Touch [Security Code Set] on the Security screen. hhSecurity Code Set screen appears. 5 Enter a security code with 4 to 8 digit number and touch [Enter]. 6 Enter the same code again and touch [Enter]. Now, your security code is registered. NOTE • Touch [BS] to delete the last entry. • If you enter a different security code, the procedure returns to step 5 (for first code entry). • If you have disconnected the Receiver from the battery, enter the correct security code as that you have entered in step 5 and touch [Enter]. You can use your receiver. To change the security code: 1 Touch [Security Code Change] on the Security screen. hhSecurity Code Set screen appears. 2 Enter the current registered security code and touch [Enter]. 3 Enter a new security code with 4 to 8 digit number and touch [Enter]. 4 Enter the same code again and touch [Enter]. The new security code is registered. To clear the security code: 1 Touch [Security Code Cancellation] on the Security screen. hhSecurity Code Set screen appears. 2 Enter the current registered security code and touch [Enter]. The security code is cleared. 10