Kenwood DPX 302 Instruction Manual - Page 7

Attenuator Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator blinks. System Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time you press the button, the sound setting alternates. Sound setting Natural User memory Rock Pops Easy Top 40 Jazz Display "NATURAL" "USER" "ROCK" "POPS" "EASY" "TOP40" "JAZZ" ⁄ • User memory: The values set on the (page 7). • Change each setting value with the (page 8). First, select the speaker type with the Speaker setting. Audio Control 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Basic Audio item Turn the [VOL] knob. Adjustment Item Display Range Subwoofer level "SW L" -15 - +15 Bass level* "BAS L" -8 - +8 Middle level* "MID L" -8 - +8 Treble level* "TRE L" -8 - +8 Balance "BAL" Left 15 - Right 15 Fader "FAD" Rear 15 - Front 15 Exit Audio Control mode (Volume control mode) * Source tone memory: Puts the set up value in the memory per source. 5 Exit Audio Control mode Press any button. Press a button other than the [VOL] knob and [ATT] button. English | 7