Kenwood DPX-MP4030 User Manual 1 - Page 10
English, Enter the Equalizer Control mode
View all Kenwood DPX-MP4030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English General features Adjustment of Equalizer type at PRO Adjusting the effect of an Equalizer type selected in when is "PRO". 1 Refer to (page 9) to select the Equalizer type. 2 Select the item for adjustment Press the [FM] or [AM] button. Each time the button is pressed, the items that can be adjusted switch as shown below. 3 Adjust the item Press the [4] or [¢] button. Adjustment Item Display Bass Center Frequency "Bas F" Bass level "Bas LV" Bass Q Factor "Bas Q" Bass Extend "EXT" Middle Center Frequency "Mid F" Middle level "Mid LV" Middle Q Factor "Mid Q" Treble Center Frequency "Tre F" Treble level "Tre LV" Range 60/70/80/100 or 150 Hz -12 - +12 dB 1.00/1.25/1.50/2.00 On/Off 0.5/1.0/1.5/2.0 kHz -12 - +12 dB 1.0/2.0 10.0/12.5/15.0/17.5 kHz -12 - +12 dB • According to the Bass Q Factor setting value, the frequencies that can be set in Bass Center Frequency change as shown below. Bass Q Factor Bass Center Frequency 1.00/1.25/1.50 60/70/80/100 2.00 60/70/80/150 • When the Bass Extend is set to ON, low frequency response is extended by 20%. Memory preset of adjustment of Equalizer type The can be preset. 1 Refer to (page 10) to adjust the Equalizer type. 2 Preset the adjusted value Press the [#1] - [#3] button for at least 2 seconds. Recalling a setting value 1 Enter the Equalizer Control mode Press the [EQ] button. "EQ PRO" is displayed. If "EQ EASY" is displayed, refer to (page 24) to set the mode to "EQ PRO". 2 Recall the setting value Press the [#1] - [#3] button. Audio Control 1 Enter the Audio Control mode Press the [AUD] button for at least 1 second. "AUD mode" is displayed. 2 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed, the items that can be adjusted switch as shown below. 3 Adjust the Audio item Press the [4] or [¢] button. - 10 -