Kenwood DPX505BT Quick Start Guide - Page 9

Wiring connection Fuse (10 A) Antenna terminal If no connections are made, do not let the wire come out from the tab. Car fuse box Ignition switch a Brown: Connect to the device equipped with muting feature to mute this unit b Blue/white: To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle c Light blue/yellow: To the steering wheel remote control adapter d Red: Ignition 12 V e Yellow: Battery 12 V f Black: Ground g White ª, White/black ·: Front speaker (left) h Gray ª, Gray/black ·: Front speaker (right) i Green ª, Green/black ·: Rear speaker (left) j Purple ª, Purple/black ·: Rear speaker (right) Before Use IMPORTANT • To ensure proper use, please read through this Guide before using this product. It is especially important that you read and observe Warnings and Cautions in this Guide. • Please keep the Guide in a safe and accessible place for future reference. WARNING Do not operate any function that takes your attention away from safe driving. CAUTION Volume setting: • Adjust the volume so that you can hear sounds outside the car to prevent accidents. • Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level. General: • Avoid using the external device if it might hinder safe driving. • Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data. • Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit. • If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate. • Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected. Turn off the unit or change the source to STANDBY when parking at a low ceiling area. 3