Kenwood DPX794BH Quick Start Guide - Page 15

Bluetooth® • Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. • Be sure to turn on the Bluetooth function of the device to make the following operations. • Signal conditions vary depending on the surroundings. Connect the microphone Connect the supplied microphone to the microphone input terminal/jack on the rear panel. Adjust the microphone angle Secure using cord clamps (not supplied) if necessary. Pair and connect a Bluetooth device for the first time 1 Press B SRC to turn on the unit. 2 Search and select the name of your receiver ("DPX794BH"/ "DPX594BT"/"DPX560BT"/"DPX524BT"/"DPX504BT"/"DPX304MBT") on the Bluetooth device. "PAIRING" "PASS XXXXXX" "Device name" "PRESS" "VOLUME KNOB" appears on the display. • For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching. 3 Press the volume knob to start pairing. "PAIRING OK" appears when pairing is completed. Once pairing is completed, Bluetooth connection is established automatically. • " " and/or " " indicator on the display window lights up. • The strength of the battery and signal of the connected device are shown on the supplementary display. Answer a call Press or the volume knob or one of the number buttons (1 to 6). • To adjust the phone volume [00] to [35], turn the volume knob. • To end a call, press . Audio player via Bluetooth 1 Press B SRC repeatedly to select BT AUDIO. • : Pressing enters BT AUDIO directly. 2 Operate the audio player via Bluetooth to start playback. To Play back/pause Select group or folder Reverse skip/Forward skip Reverse/Fast-forward Repeat play Random play On the faceplate Press 6 IW. Press 1 / 2 . Press . Press and hold . Press 4 repeatedly. Press and hold 3 to select [ALL RANDOM] or [GROUP RANDOM]. 9