Kenwood KAC-6202 Instruction Manual
Kenwood KAC-6202 Manual
 |
View all Kenwood KAC-6202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood KAC-6202 manual content summary:
- Kenwood KAC-6202 | Instruction Manual - Page 1
STEREO/BRIDGEABLE POWER AMPLIFIER KAC-6202 INSTRUCTION MANUAL © B64-3043-00/00 (MV) - Kenwood KAC-6202 | Instruction Manual - Page 2
the wiring harness. NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, consult your Kenwood dealer. Cleaning the unit If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth - Kenwood KAC-6202 | Instruction Manual - Page 3
heat to easily dissipate. Once installed, do not place any object on top of the unit. • The surface temperature of the amplifier will become hot during use. Install the amplifier in a place where people, resins, and other substances that are sensitive to heat will not come into contact with it - Kenwood KAC-6202 | Instruction Manual - Page 4
genuineaccessory car stereo. Use the diagram on the right as a guide. NOTE For the pre-output level or the maximum power output, refer to the in the instruction manual of the center unit. 4 OPERATION switch This switch is used to select the operation mode of the amplifier. • STEREO - Kenwood KAC-6202 | Instruction Manual - Page 5
protection function for protecting this unit and your speakers from various accidents or problems that can occur. When the protection function is triggered, the Power indicator goes off and the amplifier stops operating. • When a speaker wire may be short-circuited. • When a speaker output contacts - Kenwood KAC-6202 | Instruction Manual - Page 6
ground lead to this terminal. # Speaker level input terminals NOTE • The genuine-accessory car stereo shall have a maximum power output of no more than 40 W. • Do not connect the speaker output leads from a power amplifier (Optional) to the speaker level input terminals of this unit, for this may - Kenwood KAC-6202 | Instruction Manual - Page 7
according to applications, read the instruction manual well to select the proper grounding speaker wires to the metal body of the car can cause this unit to fail. • After power (in Watts) of the amplifier. Use of speakers having input power ratings that are less than the output power of the amplifier - Kenwood KAC-6202 | Instruction Manual - Page 8
UNIT (CD receiver, etc.) Left input Right input (Speaker level input Connections) Cable Color of the connector Left White White/Black Right Gray # Gray/Black Power control wire (Blue/ White) @ GND RCA cable ground terminal Speaker level input cable Genuine-accessory - Kenwood KAC-6202 | Instruction Manual - Page 9
(Stereo Connections) 00 Lead terminal* (Bridged Connections) 0 25 * Commercially available parts Left speaker Right speaker Speaker (Bridged) 25 ■ Power wire connection 25 Terminal cover 789 Power control wire Battery wire* Ground wire* Protective Fuse* Battery Lead terminal* English 9 - Kenwood KAC-6202 | Instruction Manual - Page 10
System examples ■ 2-channel system CENTER UNIT L L RR 1 4 Left speaker Right speaker ■ High-power 2-channel system CENTER UNIT ¡ L L L RR R L L RR ™ 1 4 ¡ ™ Left speaker (Bridged) Right speaker (Bridged) ■ 2-channel + Subwoofer system ¡ CENTER UNIT L L RR 1 ¡ ™1 L L - Kenwood KAC-6202 | Instruction Manual - Page 11
■ Tri-mode CENTER UNIT 1 L L RR 4 L C (High pass) C Subwoofer (L + R) (Bridged) ●Principle of Tri-mode Method of frequency band division using a coil and capacitor...in case of 6dB/oct. slope 0 dB -3 dB Crossover Frequency L C Frequency Coil (L): Passes low frequencies and blocks high - Kenwood KAC-6202 | Instruction Manual - Page 12
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM Connect the speaker wire again so in the car body. that it is not pinched by - Kenwood KAC-6202 | Instruction Manual - Page 13
Specifications Specifications subject to change without notice. Audio Section Max Power Output ...400 W Rated Power Output Normal (4 Ω) (20 Hz - 20 kHz, 0.08 % THD)...60 W x 2 Normal (2 Ω) (1 kHz, 0.8 % THD)...100 W x 2 Bridged (4 Ω) (1 kHz, 0.8 % THD)...200 W x 1 Frequency Response (+0, -3 dB) ... - Kenwood KAC-6202 | Instruction Manual - Page 14
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
© B64-3043-00/00 (MV)
STEREO/BRIDGEABLE POWER AMPLIFIER
KAC-6202
INSTRUCTION MANUAL