Kenwood KAC9103D Instruction Manual - Page 4

Connection 2WARNING To prevent fire caused by a short in the wiring, connect a fusible link or breaker nearby the battery's positive terminal. ■ RCA cable or Speaker level input connection • RCA cable connections CENTER UNIT (CD receiver, etc.) 2CAUTION • If sound is not output normally, immediately turn power off and check connections. • Be sure to turn the power off before changing the setting of any switch. • If the fuse blows, check wires for shorts, then replace the fuse with one of the same rating. • Check that no unconnected wires or connectors are touching the car body. Do not remove caps from unconnected wires or connectors to prevent short circuits. • Connect the speaker wires to appropriate speaker connectors separately. Sharing the negative wire of the speaker or grounding speaker wires to the metal body of the car can cause this unit to fail. • After installation, check that the brake lamps, winkers, and wipers work properly. NOTE • Do not connect cables and leads to both RCA cable input jacks and the speaker level input terminals simultaneously, for this may cause malfunction or damage. 30 30 30 30 • Speaker level input connections Cable Color of the connector 9 White Left · White/Black 9 Gray Right · Gray/Black Genuine-accessory car stereo (No line output center unit etc.) * Commercially available parts ■ Power wire and Speaker wire connection Power control wire RCA cable* Left input Right input Car fuse box ACC Battery Power control wire 30 30 Terminal cover Battery wire* Protective Fuse* Battery Ground wire* Lead terminal* Terminal cover Subwoofer (L + R) 4 English