Kenwood KDC-202U Instruction Manuals - Page 9
Listening to the radio
View all Kenwood KDC-202U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Listening to the radio ENGLISH Hold for about 2 seconds to memorize the current station. Press briefly to recall memorized station. 1 Press SRC to select "TUNER." 2 Press repeatedly to select a band (FM1/ FM2/ FM3/ AM). 3 Press 4 / ¢ to search for a station. Adjust [SETTINGS] mode settings While listening to the radio... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. 4 Hold to finish the procedure. Item Selectable setting (Preset: *) SEEK MODE Selects the tuning mode for 4 / ¢ buttons. AUTO1*: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ; MANUAL: Manually search for a station. AUTO MEMORY YES*: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels (automatic memorizing is not activated). (Selectable only if [NORMAL] / [NORM] is selected for [PRESET TYPE].) (page 8) MONO SET ON: Improve the FM reception (but the stereo effect may be lost). ; OFF*: Cancels (stereo effect resumes). Functions of remote controller (RC-405) Direct Access Tuning 1 Press FM+ / AM- to select a band. 2 Press DIRECT to enter Direct Access Tuning mode. "- - - -" appears on the display. 3 Press the number buttons to enter the frequency. 4 Press 4 / ¢ (+) to search for the frequency. with To cancel Direct Access Tuning mode, press or EXIT. If no operations is done for 10 seconds after step 3, Direct Access Tuning is automatically canceled. Basic operations: FM+ / AM- : Selects band. 4 / ¢ (+) : Searches for radio station. 1 - 6 : Selects preset station. 9