Kenwood KDC-3434 User Manual - Page 21

Function of the KDC-W4534 In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. • Set the Security Code when the (page 25) is set to OFF. • When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is displayed. 3 Enter Security Code mode Press the Control knob for at least 2 seconds. When "ENTER" is displayed, "CODE" is also displayed. 4 Select the digits to enter Push the Control knob towards [4] or [¢]. 5 Select the Security Code numbers Push the Control knob towards [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 8 Do the step 4 through 7 step operation, and reenter the security code. "APPROVED" is displayed. The Security Code function activates. • If you enter a Code different from your Security Code, you have to start over from step 4. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 step operation, and reenter the security code. "APPROVED" is displayed. Now, you can use the unit. • If an incorrect code is entered, "WAITING" is displayed, and the input prohibition periods shown in the table below is generated. After the input prohibition time lapses, "CODE" is displayed, and you can reenter the code. Number of times the incorrect code was input 1 2 3 4 Input prohibited time - 5 minutes 1 hour 24 hours In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. English | 21