Kenwood KDC-4027V User Manual - Page 8

General features English Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the [Q] button. In CD & External disc source Information Display Track Time Disc name* Disc title* Track title* Clock "DNPS" "D-TITLE" "T-TITLE" *: Function of the KDC-4027/KDC-4027V . 3 Select the Speaker type Press the [4] or [¢] button. Each time the button is pressed the setting switches as shown below. Speaker type Display OFF For the OEM speaker For 6 & 6x9 in. speaker For 5 & 4 in. speaker "SP OFF" "SP OEM" "SP 6/6x9" "SP 5/4" 4 Exit Speaker Setting mode Press the [Q] button. Switching Display Switching the information displayed. Press the [CLK] button. Each time the button is pressed the display switches as shown below. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. In Tuner source Information Program Service name or Frequency Clock -8-