Kenwood KDC-BT362U User Manual - Page 24

MORE INFORMATION TROUBLESHOOTING About iPod/iPhone Made for - iPod touch (2nd, 3rd, 4th, and 5th generation) - iPod classic - iPod nano (3rd, 4th, 5th, 6th, and 7th generation) - iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C • For the latest compatible list and software versions of iPhone/iPod, see: www.kenwood.com/cs/ce/ipod • You cannot operate iPod if "KENWOOD" or " " is displayed on iPod. About Android device • This unit supports Android OS 4.1 and above. • Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0. • If the Android device supports both mass storage class device and AOA 2.0, this unit always playback via AOA 2.0 as priority. • For more information and the latest compatible list, see: www.kenwood.com/cs/ce/ About Pandora • Pandora is available only in the U.S., Australia and New Zealand. • Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable. • Some functions of Pandora cannot be operated from this unit. • For issues using the application, please contact Pandora at [email protected]. About iHeartRadio • iHeartRadio® is a third-party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. • Some iHeartRadio® functionality cannot be operated from this unit. About Bluetooth • Depending on the Bluetooth version of the device, some Bluetooth devices may not be able to connect to this unit. • This unit may not work with some Bluetooth devices. • Signal conditions vary, depending on the surroundings. • For more information about Bluetooth, visit the following website: www.kenwood.com/cs/ce/ CD / USB / iPod Radio General Symptom Sound cannot be heard. "MISWIRING CHECK WIRING THEN PWR ON" appears. "PROTECTING SEND SERVICE" appears. • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. The unit does not work at all. • Radio reception is poor. • Static noise while listening to the radio. Disc cannot be ejected. Noise is generated. Tracks do not play back as you intended them to play. "READING" keeps flashing. Elapsed playing time is not correct. Correct characters are not displayed (e.g. album name). Remedy • Adjust the volume to the optimum level. • Check the cords and connections. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. Send the unit to the nearest service center. Clean the connectors. ( 2) Reset the unit. ( 3) • Connect the antenna firmly. • Pull the antenna out all the way. Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. ( 3) Skip to another track or change the disc. Playback order is determined when files are recorded. Do not use too many hierarchical levels or folders. This is caused by how the tracks are recorded. This unit can only display uppercase letters, numbers, and a limited number of symbols. 22