Kenwood KDC-BT53U Quick Start Guide 1 - Page 2

Contents Before use About the Quick Start Guide 2 Before use 2 Preparations 4 General operations 5 Playing music (CD/USB/SD/iPod 6 Listening to the radio/Digital radio 8 Hands-free phoning 9 Before installation 10 Connecting wires to terminals 12 Installing/Removing the unit 14 Installing the Microphone unit 15 Installing the Digital radio antenna...........15 Appendix 19 About the Quick Start Guide This Quick Start Guide describes basic functions of this unit. For functions not described in this Guide, refer to the Instruction Manual on the following website: manual2.jvckenwood.com/edition/im362/ # WARNING To prevent injuries or a fire, take the following precautions: • Stop the car before operating the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. ! CAUTION • Adjust the volume so that you can hear sound outside the car. Driving with the volume adjusted to a too high level may cause an accident. • Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector The unit may not function properly if the connector between the unit and faceplate are dirty. Detach the faceplate and clean the connector with a cotton swab gently, being careful not to damage the connector. Connector Condensation When the car is air-conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate. To refer to the Instruction Manual, a browser such as Internet Explorer® 7 or later, Firefox® 3.6 or later, Chrome™ 20 or later, Safari® 5.1 or later, iOS Safari® 4.0 or later, or Android™ 2.2 or later is required. 2 | Quick Start Guide