Kenwood KDC-BT565U North America - Page 20
BLUETOOTH - Mobile phone, Receive a call, Connect with a remote device by One-touch - connect bluetooth
View all Kenwood KDC-BT565U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
BLUETOOTH® Connect with a remote device by One-touch (NFC) (for ) Near Field Communication (NFC) enables short-range wireless communication between the unit and remote devices. By holding an NFC-compatible remote device near to the N-Mark on the unit (volume knob), the unit and remote device proceed to complete pairing and established the BLUETOOTH connection automatically. 1 Activate the NFC function on the remote device. Refer to the instruction manual of the remote device for more information. 2 Hold the remote device near to the N-Mark on the unit (volume knob). The device vibrates when pairing is completed. BLUETOOTH - Mobile phone Receive a call When there is an incoming call: • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 17) During a call: • The buttons and display illuminate according to the settings made for [DISPLAY]. ( 23) • If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected. The following operations may differ or not available depending on the connected phone. To First incoming call... Answer a call • To disconnect, hold the remote device near to the N-Mark on the unit (volume knob) again. • This unit only can recognize and connect to one NFCcompatible device at a time. Reject a call End a call On the faceplate On the remote control Press or the volume knob or one of the number buttons (1 to 6). Press . Press . Press . Press . Press . 16