Kenwood KDC MP142 Instruction Manual - Page 10
Activating Security Code, Deactivating Security Code - reset
UPC - 019048180155
View all Kenwood KDC MP142 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Menu Operation Function of KDC-MP242 Activating Security Code When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off. ⁄ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the Search button for at least 1 second. When "MENU" is displayed, "CODE SET" is also displayed. 3 Enter Security Code mode Press the [AUD] knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 4 Select the digits to enter Press the [4] or [¢] button. 5 Select the Security Code numbers Press the [FM+] or [AM-] button. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the [AUD] knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 8 Do the step 4 through 7 operation, and reenter the Security Code. "APPROVED" is displayed. The Security Code function activates. ⁄ • If you enter the wrong Code in steps 4 through 6, repeat from step 4. 9 Exit Security Code mode Press the Search button. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter 10 | KDC-MP242/KDC-MP142/CR the Security Code. "APPROVED" is displayed. Now, you can use the unit. ⁄ • When the Security Code function is activated, "CODE SET" changes to "CODE CLR". • To deactivate the Security Code function, see the next section . Function of KDC-MP242 Deactivating Security Code To deactivate the Security Code function. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the Search button for at least 1 second. "MENU" is displayed. 3 Select Security Code mode Press the [FM+] or [AM-] button. Select the "CODE CLR" display. 4 Enter Security Code mode Press the [AUD] knob for at least 1 second. When "ENTER" is displayed, "CODE CLR" is also displayed. 5 Select the digits to enter Press the [4] or [¢] button. 6 Select the Security Code numbers Press the [FM+] or [AM-] button. 7 Repeat steps 4 and 5, and complete the Security Code. 8 Press the [AUD] knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. 9 Exit Security Code mode Press the Search button. ⁄ • If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code.