Kenwood KDC-X5200BT Instruction Manual 1 - Page 19
Function], Bt Mode, Phone Select, Audio Select, Device Delete, Pin Code Edit, Reconnect, Auto - test
View all Kenwood KDC-X5200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
BLUETOOTH® Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press . BT MODE PHONE SELECT AUDIO SELECT DEVICE DELETE PIN CODE EDIT (0000) RECONNECT AUTO PAIRING INITIALIZE Default: XX Selects the phone or audio device to connect or disconnect. "*" appears in front of the device name when connected. " " appears in front of the current playback audio device. • You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time. 1 Turn the volume knob to select a device to delete, then press the knob. 2 Turn the volume knob to select [YES] or [NO], then press the knob. Changes the PIN code (up to 6 digits). 1 Turn the volume knob to select a number. 2 Press S / T to move the entry position. Repeat steps 1 and 2 until you finish entering the PIN code. 3 Press the volume knob to confirm. ON: The unit automatically reconnect when the last connected Bluetooth device is within range. ; OFF: Cancels. ON: The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/Android device) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; OFF: Cancels. YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; NO: Cancels. Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . "PLEASE PAIR YOUR PHONE PIN 0000" appears. 2 Search and select this unit model name (KDC-X5***BT) on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. "TESTING" flashes on the display. The connectivity result (OK or NG) appears after the test. PAIRING: Pairing status HF CONNECT: Hands-Free Profile (HFP) compatibility AUDIO CONNECT: Advanced Audio Distribution Profile (A2DP) compatibility PHONEBOOK DL: Phonebook Access profile (PBAP) compatibility To cancel test mode, press and hold to turn off the unit. ENGLISH 15