Kenwood KDC-X891 Instruction Manual - Page 37
Date Mode, Synchronize Clock, DSI Disabled System Indicator, Display Illumination Control, Dimmer,
![]() |
View all Kenwood KDC-X891 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
In Standby mode Date Mode Setting the date format. 1 Select Date Mode Turn the Control knob. Select the "Date Mode" display. 2 Enter Date mode Press the Control knob for at least 1 second. 3 Select the date format Turn the Control knob or push it towards up or down. 4 Exit Date mode Press the [FNC] button. In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit's clock. Display "SYNC : OFF" "SYNC : ON" Setting Adjust the time manually. Synchronizes the time. ⁄ • It takes 3 to 4 minutes to synchronize the clock. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI : ON" "DSI : OFF" Setting LED flashes. LED OFF. Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display "Display : ON" "Display : OFF" Setting Keeps the display on. Turns off the display when you perform no operation for 5 seconds. ⁄ • Set the Display Illumination Control when the (page 43) is set to OFF. • When the display is off, pressing any key will turn on the display. • When the display is off, you cannot perform any operation except for the following: • Volume • Attenuator • Selecting the source • Ejecting the disc • Turning off the power • USB remove mode • During function control, such as the Menu System, the display stays on. In Standby mode Dimmer Dimming this unit's display automatically when the vehicle light switch is turned ON. Display "Dimmer : ON" "Dimmer : OFF" Setting The display dims. The display doesn't dim. In Standby mode Built-in Amp Setting Controlling the built-in amplifier. Turning OFF this control enhances the preout quality. Display "AMP : ON" "AMP : OFF" Setting The built-in amplifier activates. The built-in amplifier deactivates. English | 37
![](/manual_guide/products/kenwood-kdcx891-instruction-manual-574fdfb/37.png)